Murphy Concrete Lifting
Polyurethane Foam Leveling in Murphy, TX
Polyurethane foam leveling in Murphy, TX lifts sunken concrete with small ports and fast cure times. Free estimates, minimal yard disruption.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Murphy and nearby communities.
Ever wonder why some crews finish a lift job in an afternoon while others need three days and a mixer truck? Foam.
Polyurethane foam leveling injects a lightweight expanding foam under a sunken slab through dime-size ports. It fills the void, lifts the concrete, and cures in minutes instead of days. Murphy Concrete Lifting uses this as the go-to method for most residential slabs around Murphy.
What's included
What's Included
- Small port drilling, typically 5/8 inch, spaced to match the void pattern
- Two-part foam injected in controlled lifts, monitored as the slab rises
- Port patching once the surface reaches level
- Cleanup of any excess foam overflow at the edges
Want a clearer scope?
Get a Free EstimateHow it works
How Our Polyurethane Foam Leveling Process Works
Step 1Inspection
Check the slab and locate the low points.
Step 2Port layout
Mark injection spots based on void size.
Step 3Drilling
Small holes through the slab surface.
Step 4Staged injection
Foam goes in layers, not all at once.
Step 5Rise monitoring
Watch the lift in real time to avoid overshoot.
Step 6Patch and seal
Fill the ports flush with the surface.
Step 7Final check
Level confirmed with a straightedge.
Step 8Site cleanup
Tools packed, area swept.
FAQs
Polyurethane Foam Leveling FAQs
Is mudjacking or polyurethane foam better for Texas clay soil?
Foam holds up better here. It's closed-cell and water resistant, so it doesn't soak up moisture the way mud slurry can when Collin County clay swells and shrinks through the seasons.
Will canned spray foam from the hardware store actually lift a slab?
No. Canned foam has no structural rating and nowhere near the lift force a metered injection rig produces. It's meant for gap filling, not raising concrete.
How long before I can drive on the driveway?
Foam cures in about 15 minutes. Most driveways are drivable the same day.
Does foam injection need a permit?
Injecting into an existing slab typically doesn't require a permit in Murphy. Verify with the city if you're unsure.
Next step
Get a Polyurethane Foam Leveling Estimate in Murphy
Call +1 (361) 256-5911 for a free estimate, or send a request online. We'll walk the slab and tell you what it actually needs.
Before & after
Before and After Polyurethane Foam Leveling
Before 
After
Timeline
How long does a Polyurethane Foam Leveling take?
A typical job moves fast, start to finish in one visit. Home | Contact | Driveway Leveling
- 01
Inspection
same day - 02
Foam injection
1–2 hoursdepending on slab size
- 03
Cure time
about 15 minutes
- 04
Full load-bearing rating
within an hour of cure
Need a schedule that fits?
Get a Free EstimateMore services
Other Concrete Lifting services
Concrete Slab Lifting
Concrete slab lifting in Murphy, TX raises sunken driveways, walks, and patios with foam injection. Free estimates, same-day results.
Driveway Leveling
Driveway leveling in Murphy, TX fixes sunken panels with foam injection, drivable same day. Free estimates for uneven driveways.
Patio Repair
Patio concrete repair in Murphy, TX levels sunken slabs near the back door with foam injection. Free estimates, same-day cure.
Ask about Polyurethane Foam Leveling
Tell us about the project and how to reach you.